Pressure Operated Orientation Platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design for a vacuum-operated soft mounting system for sanding, routing, polishing, etc of flat and near-flat materials.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design for a vacuum-operated soft mounting system for sanding, routing, polishing, etc of flat and near-flat materials. This is a simplified take on the Festool VAC SYS tool. Suits 45mm vacuum hoses.
The 'lip' and 'pad' parts should be printed in TPU or similar and are interchangeable to accommodate different workpieces. The pad is the primary interface device, the lip is only needed if you want to work on non-flat workpieces.
Build video: https://www.youtube.com/watch?v=c8UZlrgPqVo
Disclaimer: If the shit hits the fan and your vacuum breaks because of the POOP, don't blame me.