iPhone + Watch + AirPod Pro charger stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish stand, setup as 2 parts for easy printing. Works with iPhone 14 Pro camera bulge.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 2183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I liked the design that Bar1ow created but struggled to print it, and wanted AirPods support. I also found that design prone to breaking. So I modified the model, made it print in 2 parts that assemble, and added a large fillet support underneath to prevent it from breaking.
I had a modified stand next to my bed for over a year, then the new iPhone 14 Pro came out with more cameras, and the camera bulge got bigger. This model has a cutout to work with the bigger camera bulge from the iPhone 14 Pro, even in a case. It should also work with non-Pro models. There is also a little resting spot for the AirPods to lay with a spot to place the charger underneath. Cable management is built into the stand.
You will need this wireless charger (less than 10$ USD) for the AirPods. The Phone and Watch use the standard Apple wireless chargers.
I printed these with full supports at 0.2mm using Duramic Matte Black PLA.
Print the Face STL, face down (I recommend a textured sheet).
Print the Stand STL with a modifier to make the top ⅓ at 100% infill. The included .3mf file has this modification.
When assembling, you will need 2 M3x8mm screws. I also recommend a few dabs of glue to keep it all nice and snug.
As with all my designs, I included the Fusion 360 files I used to design all of this.