1 / 9
BMG Extruder Carriege DissEd-MK3 for AM8
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BMG MK3 mod for AM8 Print belt test before any "x carriege" to choose the right one for you.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 167
- Wydruki
- 3
- Wyświetlenia
- 1383
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (35)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (0)Kolekcje (36)Powiązane
BMG MK3 mod for AM8
Print belt test before any "x carriege" to choose the right one for you.
- Changed BL_touch body
- Uploaded wrong fan pancake holder. It's fixed now (pancake_DissEd = Good). Sorry, my bad.
- Belt holder in x carriege keeps the design from prusa and most belts don't want to play nice with it. Uploaded a belt test to check which one works with your gt2 belt. The x carrieges are named accordingly (If your belt fits in number "2", download x_carriege2...)
- Changed body, cover and x_carriege(1,2,3) to use hexagonal nuts instead of the square ones. HexNut in the name for id. Printed a sample and all nut holes are ok. I did modified them. First ones weren't.
- For "fan holder both screws" the lower-right screw is 25mm. In case you don't use this part THE SCREW SHOULD BE 18MM, no more. - Removed due to screw colliding with radial fan
- Bltouch offset is 30mm for X and 0mm for Y. I used lee0101 design (https://www.thingiverse.com/thing:3230048) to incorporate the bltouch in mine