Ender 3 PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PSU mount for the Ender 3 to get a space between the Z axis and the PSU for a dual Z axis mod. The space between the…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 220
- Wydruki
- 6
- Wyświetlenia
- 1470
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A PSU mount for the Ender 3 to get a space between the Z axis and the PSU for a dual Z axis mod. The space between the Z axis and the PSU is 55mm respectively 60mm.
This thing is designed to work together with this mods:
- Teaching Tech Electronic Housing https://www.thingiverse.com/thing:3688967
- Dual Z-Axis Mod https://www.thingiverse.com/thing:3440272
You will need the following screws:
- 4x M5 12mm or longer (for me two screws provide sufficient strength)
- 3x M4 14mm (exact length)
- 3x M4 washers (optional)
You will have to cut a thread for the M5 screws into the aluminium profile. For me it worked to cut the thread with the screw it self, since I do not have a thread cutter.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2 layer height with 4 perimeters
Infill:
20%
Filament: Goedis PETG gray
Notes:
You only need support for the "back" part.
Category: 3D Printer Parts