1 / 16

Ender 3 Dual Z-Axis Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M4n1

@M4n1_603184

This is a dual Z-axis mod for the Creality Ender 3 with a single Z-axis stepper motor. I found some of this mods…

Ocena: 0 / 5
Polubienia: 37
Pobrania: 179
Wydruki: 0
Wyświetlenia: 3238
Oceny: 0

Aktualizacja u źródła: 19 lut 2023

Informacje o modelu

Źródło: Printables
Kategoria: Creality Parts & Upgrades
Licencja: Creative Commons — Attribution

Szczegóły Pliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (63)

This is a dual Z-axis mod for the Creality Ender 3 with a single Z-axis stepper motor. I found some of this mods already on thingverse. Hence I wanted to use this spindle set I found on amazon (https://www.amazon.de/gp/product/B01NBX4LBZ/ref=ppx_yo_dt_b_asin_title_o01__o00_s01?ie=UTF8&psc=1), I had to redesign the frame mount for the bearings. Addittionally I wanted an aluminium profile for the Z-axis spindle mount.

I have also decided to attach a printable version of the spindle mount. Note: I have not tried printing the spindle mount for the axis. It would be nice if someone who tried printing this parts could provide feedback about the fitting and strength of this parts.

I want to provide a complete guide for this mod. Therefore I have attached two PDF files. One describes all required measurements for the aluminium L-profile required to build this mod and the second describes the GT2 belt joining process.

Since you have to move the PSU you will have to print a PSU holder e.g. https://www.thingiverse.com/thing:3304804