Tablet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tablet holder - extra wide, Alldocube with case example.
- Ocena
- 4,8 / 5
- Polubienia
- 113
- Pobrania
- 1877
- Wydruki
- 12
- Wyświetlenia
- 4855
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I needed an Alldocube tablet holder including a case - I hope I didn't inadvertently copy someone's design. Two versions with or without support.
Tested on Alldocube iPlay30, iPlay40 and iPlay50 including cover.
Basic version V01-1: 23.26m of filament
Basic version with single support V01-2: 25,80m of filament
Basic version with two supports V01-3: 26,92m of filament
Edit version V02-1: 23,38m of filament
Edit version with single support V02-2: 25,26m of filament
Edit version with two supports V02-3: 26,37m of filament
Angle holder: 75°
Material: any (tested PLA, PETG)
Print settings:
Nozzle: 0.4
Layer height: 0.2
Perimeters: 3
Top layers: 5
Bottom layers: 4
Padding: 15% grid
Supports: NO