Umbrella Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder that makes it easier to carry large or long umbrellas.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Someone mentioned that large umbrellas are hard to carry, so I made a holder.
It have a Picatinny Rail (20mm rail) and a Modular Lock (M-LOK), but it is not particularly meaningful.
It might be somewhat useful to add a light or a hanging cord.
- The inside diameter is 45mm.
- The inside diameter is 41mm. (Update!)
About printing
Support material needs to be set.
Please refer to the attached photo for printing direction.
For material, I recommend PETG or higher for long-term use.
Other than that, standard conditions should be fine.
0.4 Nozzle, height 0.2 mm, wall 2 min, width 0.4 mm min, infill 15% min .
UPDATE 2023.03.09
Added 41mm inner diameter version.
Removed version with tapered inner surface.
Re-examined print orientation and support placement.
Added g-code files.
Needless to say, please use it on a fine day.
Use in serious situations can lead to misunderstandings and injuries.