1 / 3
Geometric Curved Planter with Drainage Holes — zdjęcie 1
1 / 3

Geometric Curved Planter with Drainage Holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple, elegant geometric planter with gentle curves and built-in drainage holes.

Ocena
0 / 5
Polubienia
58
Pobrania
183
Wydruki
1
Wyświetlenia
700
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The pictured print was done with 0.2mm layer height with grey SUNLU PLA+ filament. Note that the “fuzzy skin” feature was enabled in order to produce an organic texture.

 

By default, the pot has an approximate diameter of 3.75in (95mm) and a height of 3.25in (85mm). The central drainage hole has a diameter of 0.25in (6.35mm) and the smaller ones are each 0.2in (5.08mm). It can certainly be scaled to whatever diameter or height you are interested in. 

 

If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps!

https://www.paypal.me/theprintedplanter

Tagi