Tape(50mm) holder with or without screwholes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really simple holder for painters tape created in openscad. Holder is for 50mm wide tape but can be scaled.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Really simple holder for painters tape created in openscad.
Holder is for 50mm wide tape but can be scaled.
Has a version with holes for screws and one without for gluing(or double sided taping).
Incredibly simple not much too it but works great.
Ensure you print with enough infill to make it strong enough, I used 60%
Print instructions
Category: Tool Holders & Boxes Summary
Really simple holder for painters tape created in openscad.
Holder is for 50mm wide tape but can be scaled.
Has a version with holes for screws and one without for gluing(or double sided taping).
Incredibly simple not much too it but works great.
Ensure you print with enough infill to make it strong enough, I used 60%
Print Settings
Printer Brand: Creality
Printer: CR-10 Mini
Rafts: No
Supports: No
Resolution: 0.1-0.2
Infill: 50+%