BOSCH GKF 12V-8 Circle Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improved version of https://www.thingiverse.com/thing:4111887 to reach tighter radiuses
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an improved version of https://www.thingiverse.com/thing:4111887 to reach tighter radiuses.
With a Ø6mm bit, it's now possible to reach a minimum of 13mm internal radius (cut a disc of Ø26mm) or 19mm external radius (cut a cutout of Ø38mm).
I modified the original follower as well (I'm using a steel pin instead of a simple nub in the 3D model) to be used as it's easier to remove when you do not need super tight radii.
The knob is “star_grip_screw_m5” from https://www.thingiverse.com/thing:845951
You will need :
- a hexagonal bolt M5x20
- a M5 nut
- a small length of Ø3mm steel axle for the pin
- an additional M4x8 screw with a chamfered head (in the groove in front of the router bit)
Printing :
- PLA
- 20% infill
- 0.4mm nozzle
- 0.2 layer height