Fantasy dagger - Cosplay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Simple fantasy knife I made for someone I have uploaded the complete model as well as a cut version in 3 parts(plus…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 736
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Simple fantasy knife I made for someone
I have uploaded the complete model as well as a cut version in 3 parts(plus some joiners).
I printed with minimal infill(only infill on top/bottom of handle then the rest hollow with 3 perimeters) and then filled the blade and handle with plaster to make the item rigid and have some mass.
If you want to print and use without filling the void then I would guess you would want 30% or more infill for this item depending on your printer.
Print instructions
Category: Props Summary
A Simple fantasy knife I made for someone
I have uploaded the complete model as well as a cut version in 3 parts(plus some joiners).
I printed with minimal infill(only infill on top/bottom of handle then the rest hollow with 3 perimeters) and then filled the blade and handle with plaster to make the item rigid and have some mass.
If you want to print and use without filling the void then I would guess you would want 30% or more infill for this item depending on your printer.