Sanwa JLF joystick restrictor collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of gates to restrict the travel of Sanwa JLF joysticks in different directions.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 175
- Wydruki
- 1
- Wyświetlenia
- 1331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a gate to replace the rotatable insert in the restrictor-plate of my (cloned) Sanwa JLF-type arcade joysticks.
This gate restricts the travel of the joystick to 4way and gives a more guided motion than the plate that comes with the joystick.
Printed in PLA with 100% infill for rigidity. Layer height 0.3mm. The horns need support.
To replace the stock plate, just push it upwards and rotate ca. 45° left until it comes out.
Mount the new plate by inserting it and rotate it the other way.
I was asked to add a plate that blocks the upwards movement of the joystick. I haven't tested it myself. Feel free to print and test it.
I added two additional plates that only allow horizontal or vertical movement.
FreeCAD files included. You can modify dimensions if needed.