ring with big plate (very versatile)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and very versatile ring design
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
**** There is a newer design for this available - please check “RINGsome - create rings with an impact” *****
This is a very versatile ring and earring design.
The ring consists of the ring itself and an attachable plate (35mm diameter). Those two parts can be glued together.
The versatility is the simple design. You can put any figure onto the ring plate within your favorite SW and you have a new ring. Try to experiment around!
Here is an example:
In addition to the ring I added a earring plate, in which you can drill a hole for the earrring hook for yourself.
In the end you will have a ring and earring in your own design - enjoy it and I'm really looking forward to see your designs in this post.
P.S.: If you are looking for this very cute Ballon Dog Set (Ring and Earrings) follow this link
------------------------------------------------------------
Note 26.02.2023:
- added single *.3mf with all ring sizes, ring and earring plate
Note 25.02.2023:
- added ring sizes 22mm, 21mm, 20mm, 19mm, 18mm, 17mm, 16mm
Notes 19Feb2023:
- I've added the Fusion360 File for the ring. Within the sketch “Ring_size” you can change the adapt the ring for your needs. Default Size is 21.2mm inner diameter
- the ring plate has to be printed with support structure. The last layer of this support inside the ringplate often doesn't get loose - you have to sand, scratch this last layer away in order to insert/glue the ring