33.5mm Hurricane flywheel cage for Buzz Bee Brute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a customized flywheel cage for the Buzz Bee Brute. It will allow you to use Hurricane flywheels.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 2
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
This is a customized flywheel cage for the Buzz Bee Air Warriors Ultra-Tek Brute, allowing you to use the smaller Hurricane flywheels made by Worker. The main source is Kuryaka's reference cage, but it also has elements from Open Flywheel Project (OFP).
The spacing is 33.5mm, which on the right motors will give very nice FPS for many HvZ events and also for superstock foam wars.
I also built mine with a pusher extension, which is a remix of a different part on Thingiverse (https://www.thingiverse.com/thing:3419773) but I had to cut and file down the print a bit to get it to fit.
I expect this should work in the Buzz Bee Cyclonic also if you mirror it, but I haven't tested that.