Gridfinity Snapfinity Baseplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap together Gridfinity baseplate.
- Ocena
- 5 / 5
- Polubienia
- 192
- Pobrania
- 876
- Wydruki
- 8
- Wyświetlenia
- 4642
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity is configurable. How about a configurable baseplate?
This is a snap together, reconfigurable baseplate for Gridfinity. You can print a bunch of 1X1 baseplates and a bunch of clips and then assemble them to whatever size baseplate you want. If it doesn't work out, unclip them and reconfigure.
This model is roughly based on Kyle Warren's screw together baseplate, but I started from scratch and changed to M3 sized holes and 6mm magnet insets to be compatible with Zach Freedman's baseplates.
Print the clips from PETG. The baseplate parts can be PLA, but PLA clips distort and get loose over time.
Print the clips on their side (C shapes) for maximum strength.
Update 2 March 2023: I added blocks of multiple units: 1x2, 1x3,… up to 6x6.