1 / 2
The Beast - Tower / Roll Bar 12 inch Subwoofer enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design for a 12 Inch Subwoofer for my Rzr roll bar.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
Design for a 12 Inch Subwoofer for my Rzr roll bar.
Videos:
https://youtu.be/ib4kLUPlFtU
https://youtu.be/xPikC_gUs3Q
Things to note.
- You need a LARGE scale printer to print this.
- It takes over 60 hours to print this.
- It does not have mounting holes, the reason being that alot of 12" subwoofers vary in location of mounting holes, I suggest heating up the screw and drilling it so you get a nice molded hole.
- I have not included a mount, I used a mount from another designer to mount mine but I'm not completely happy with it. I suggest you find a good aftermarket amazon one to hold it tight.
- Not all subwoofers are built the same, some need alot more are, this is just barely under the minimum of my air space requirement.