3D printer belt tensioning tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you hear "make sure your belts are tight" what does that mean to you?
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 3226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
"Tight" can be all over the place depending on who's doing the tightening.
I made this tool to help you get your 2mm belts close and consistent. I am using it on a Prusa mk3, but it will work with other printers if using the same type and size belts.
This should help you get the belt tension on a mk3 and mk3s somewhere between the 240-300 that's recommended.
Heres the how to video.
https://rumble.com/vf89et-3d-printer-belt-tensioning-tool.html
Print instructions
I used Prusament PETG, but I think any PETG should be close enough.
Print with 3 perimeter and 100% rectilinear infill.
(See picture) the "arms" should only have perimeters.