Set of 4 Yin Yang chopstick holders with storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box set of 4 Yin Yang chopstick holders.
- Ocena
- 0 / 5
- Polubienia
- 83
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The base chopstick holder is “Yin” on one side and “Yang” on the other. The second in a set of 2 is just mirror image of the first one so that you can flip it over and stack them to make the Yin Yang design.
You can print an entire set of 4 with the box all at once and only need 2 filament changes. I recommend you do these in a 1-2-1 pattern with contrasting colors. The set used in the pictures was printed with a white-black-white pattern.
Printing: I used PrusaSlicer with .16mm layer height .4mm nozzle and 15% infill (Printing with an Ender 5 if that matters). Filament changes took place for me at 2.44mm and 17.96 mm, but your stops may vary slightly depending on the settings you print at. You should be able to see where the pattern changes for the stops.