Tiki Soda Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a soda/beer can model with a Tiki head on top. I made this to fit in a can koozie as a decoration.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution
I made this to fit in a can koozie as a decoration. The model was made in TinkerCAD using the can and Tiki toy part. I modified the Tiki head to remove the toy connector piece and fill in the back of the head. I am a noob so there is much room for improvement.
The included gcode file has filament changes set at layers 31, 563, and 575 to come up with the look int he pictures. I used silver for the bottom and rim, stone for the main body of the can, and gold for the head. The lightening infill supports the top of the can and reduces the print time by substantially reducing the amount of filament used.