Mechanical Iris / Aperture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mechanical iris. not scalable.
- Ocena
- 4,5 / 5
- Polubienia
- 130
- Pobrania
- 738
- Wydruki
- 1
- Wyświetlenia
- 5799
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This design created by Arthur Harsuvanakit originally paper model.
Original project: https://www.instructables.com/Paper-Iris-Glasses/
His Youtube channel : https://www.youtube.com/channel/UC3S8o-P2FaA82srxstYZVPw
I just edited his dxf file to 3d print.
Print with 0.2 resolution.
Print 18 leafs and 18 pins.
when you place the pin you should press the pin with hot flat metal to melt and fix in place.
The body is in three pieces you have to glue the part 4,6 together first and then place the leafs and pins. after putting the leaf on to part 2 every pin should pressed/flattened with 70-80 degree celcius flat metal.
there is a very very poor assembly video that might explain a little bit :)