Odroid N2+/Home Assistant Blue IKEA Skadis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips to mound an Odroid N2+ (or Home Assistant Blue) single board computer via heatsink fan screws to an IKEA Skadis…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Clips to mound an Odroid N2+ (or Home Assistant Blue) single board computer via heatsink fan screws to an IKEA Skadis pegboard
Notes:
- Hooks & nubs are 5mm diameter. May be brittle. Print with no infill
- Requires 4 M3 screws with 6mm shaft (~3.3mm head)
Warning: Using longer screws may damage the N2+ board
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20%/100%
Filament: Cocoon PLA White
Notes:
The hooks can be brittle, so I printed using 20% infill for the plate, and 100# for the hooks in Cura. A brim to help with bed adhesion. Supports only required under the hooks.
Designed in OpenSCAD (source file included)
Category: Electronics