LGX Bodentube PTFE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a remix to bond tech official LGX sensor cover to add PTFE boden tube to use the printer inside the enclosure
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
you can use the 5mm insert which comes with Prusa enclouser or the one which comes with the mmu2s. there is 2 holes to remove the sensor but becareful while removing there is a diode near the sensor lock insert 2 1,5mm Allen keys in both holes and push them at the same time to avoid damaging it. to avoid breaking the cover lock legs remove the left side then move the cover horizontally or try to sand the lock legs before you insert it. please check the photos for more info. Avoid filament with glitter . ignore the removing process of the cover if you print it in Prusament orange . but pay attention while removing the sensor from the original cover to avoid damaging the diode .