Roof for truefruits bird feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This should keep the pigeons from eating all the food
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I like the TrueFruits Birdfeeder, but also the pigeons like it. So i wanted to make a hut for it to keep the pigeons away to make place for smaller birds.
The hut clips into the existing model and has a 22mm hole, which should fit the smaller birds.
There are two versions, one with a hole, one with a cutout.
Hopefully it will work. Print on the roof. Printed in my case with a 0.8mm nozzle and 3DJake clear PETG.
UPDATE 27.02.2023:
I added TF_Birdfeeder_Hut_Door_anchor, this is the Door version with a larger hook which can be better attached with a rubberband to keep the pigeons from knocking of the hut.