Chopstick riser with holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chopstick rest that can be stacked on the holder The riser can also be used to hold a spoon or an egg
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a chopstick rest that can be stacked on the holder
I designed this solution for the Chopstick Holders contest on Printables (Ends on February 26)
Second utility :
The holder can hold up to at least 6 chopstick holders
The same hole used for stacking can also be use to hold a table spoon
The same hole used for stacking can also be use to hold an hard boiled egg
Safety :
The parts seems big enough that a kid could not choke on them also if safety is one of your concern
You can use PLA as I did since it is safe food
3D Models :
Here's the Onshape link for anyone that want to configure their own
.STL and .STEP are in the attached files
Printing :
- Printed on a ender 3
- Printed with Overture white PLA
- Printed with a 0.5 mm nozzle
- 0.2 mm layer height for the chopstick holder
- 0.35 mm layer height for the holder
- 3 walls and top/bottom layers
- 25 % gyroid infill
- No support needed
I want to add that I also took inspiration from Chin Ju Wei, a seller on Carousell
Have fun and happy 3d printing