Curtain holder for windows under roof pitches (TPU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU clamp to hold a curtain in the corner of the window under a roof pitch ...
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
My apartment has some windows under pitched roofs. I couldn't get the curtain rods all the way into the corners … so the curtain tends to hang in a bit of a weird way and there's an ugly gap between the wall and window that is not covered by the curtain.
So I designed these holders to get the curtain all the way into the corner. There's one straigt holder and one with a 45° bend … just try and see which one fits your situation. I printed mine from Shore A 95 TPU and they are still a bit on the soft side …
If you don't have any TPU, you might get along with 2 perimeters of 0,4 mm PETG and no infill … if you try this, please leave a comment if it works or not!