A postmodern Lavalamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lavalamps are awesome right? But in 2016 we have these amazing technologies like addressable LEDstrips,…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Lavalamps are awesome right?
But in 2016 we have these amazing technologies like addressable LEDstrips, microcontrollers and a buzzing DIY electronics crowd.
Because of all that i made this lavalamp.
You are free to make your own, i might even send you the openScad file if you are interested, i just wont put it here because it is a mess. ;)
Wou will need to put something shiny in the lamp.
I used a 10mm aluminium rod and a usblinky kit [0].
[0] http://www.hackerspaceshop.com/blinky/usblinky.html
Print Settings
Printer:
The machine with the bing.
Rafts:
Yes
Supports:
No
Resolution:
0.3mm
Infill:
100%
Notes:
LAMP:
The lamp itself took about 60 hours to print.
Using 100% infill is important, also use CLEAR filament as it is a good light guide.
Use a brim for the lamp and no support structure.
STAND/SOCKET:
You dont need a brim for the stand but make sure to use build plate touching support material.
I used black filament, white might also look good.
Post-Printing
Insert the Ledstrips
and attach the controller (usblinky[0] in my case).
[0] http://www.hackerspaceshop.com/blinky/usblinky.html
Assmble stand and lamp..
..using 4 woodscrews (ca 3mm, 6-10mm length)
Category: Sculptures