usblinky 3D ORB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a parametric design made in openSCAD that generates objects with a hollow shaft in the middle where the…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a parametric design made in openSCAD that generates objects with a hollow shaft in the middle where the usblinky is inserted.
Its a kind of 21st century lavalamp thing.
Check out the videos to see what it looks like.
usblinky is a small usbstick that displays a variety of colorful patterns.
usblinky can run in standalone mode or be programmed from a computer directly over usb using the Arduino for Digispark environment.
Links: http://www.hackerspaceshop.com/blinky/usblinky.html https://metalab.at/wiki/Usblinky http://www.openscad.org/
Videos: https://www.youtube.com/watch?v=iY2UvfaMfJs
Instructions
Print it with 0.1-0.2mm layer height from transparent material.
You might also use white filament, but it will swallow a lot of light.
Category: Decor