1 / 5
Magnetic holder for Papermate Inkjoy pen (dual, parametric) — zdjęcie 1
1 / 5

Magnetic holder for Papermate Inkjoy pen (dual, parametric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Used to hold a pair of Papermate Inkjoy pens on the refrigerator using the power of magnets!

Ocena
0 / 5
Polubienia
9
Pobrania
57
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

This is a remix of the single pen version which can be found here.

I designed a holder for a pair of Papermate Inkjoy pens as they are my partner's preferred pen and we use them to write things on the calendar on our fridge. I dislike rummaging through the utensil drawer next to the fridge to find a pen, so I designed a holder that will stick to the fridge. I left enough space inside for the pen tips to be able to be left in the extended positions, just in case someone forgets to retract it before storing them.

I used four 6x2mm neodymium magnets that I had ordered in bulk for Gridfinity bases. The OpenSCAD model is parameterized so that the magnet size can be changed if you have another size on hand. Initially, I just pressure fit the magnets into the holder but I've found they really should be superglued in place for long term use. The model could also be adapted for a different size pen if you're not a fan of the Inkjoys.

The model in the photos was printed in EurekaTec PLA Royal Fuschia with 0.2mm layers, with supports and a brim since there isn't a lot of contact with the base plate. Printing with the holes down leaves a nice finish on the visible parts and the only places that should have supports are the magnet holes. The centers are very short bridges that should be doable on most printers so they shouldn't need supports.

Tagi