1 / 2
CHOPSTICK GRIPPER
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trigger actuated chopstick gripper/ stand
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 953
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This chopstick holder also functions as a gripper for those who can not use or prefer not to use chopsticks as originally intended.
Parts List:
1 (Bottom Plate)
1 (Grip)
1 (Rack Gear)
1 (Trigger) (Support needed for Trigger overhang)
1 (Top Plate)
2 (Chopstick Gear)
2 (Gear Pin)
Additional Material:
CA Glue
Assembly Instructions:
(All of the pin connections are designed to fit best with glue)
- Print the Grip and the Bottom Plate and glue them together.
- Print the Trigger and the Rack Gear and glue them together.
- Print the Top Plate and insert it over the proud cutouts on the Bottom Plate.
- Print two Chopstick Gears and two Gear Pins.
- Install the pins through the hole in the Chopstick Gears into the matching holes in the Top Plate.
- Install wooden Chopsticks through holders on top of Chopstick Gears and use.