Pen Protector / Clip for Lenovo Digital Pen 2 / ActivePen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects the plastic tip from drops, and allows you to safely store it in a pocket, or with holder.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 730
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The pen is retained through friction only in the first few millimeters of the main body, allowing plenty of space for the buttons in all orientations.
Designed specifically for the Lenovo "Digital Pen 2", though there are multiple versions by that same name, it should work for all of them and many other 9.5mm diameter pens. Mine measures to about 9.55mm with calipers.
The pocket clip works, but isn't perfect. The whole thing sliced a bit odd, but it does the job, and I'd like to put some miles on it before I make a larger time investment into the design.
Please print the test file first before printing the full model. That way you can make sure it will provide sufficient friction to hold the pen. The test file is only the retention portion for the pen.
Leave me a comment if you need it adjusted, and I will if I have time.
It is also compatible with these two clips to attach it to either the SD card reader, or a USB port. I've printed and used both, and they are both excellent.
https://www.printables.com/model/84653-penholder-for-lenovo-activepen/comments/654765
https://www.printables.com/model/209942-lenovo-pen-holder/comments/654760
FreeCAD file included.
Print Settitngs:
I printed it with a 0.40mm nozzle, at 0.40mm line width, 0.20mm line height.
PLA
Printed standing upright.
Adhesion only under the pocket clip, no supports needed.