1 / 3
Photo Light Box Corners — zdjęcie 1
1 / 3

Photo Light Box Corners

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corner tabs for a DIY Photo Studio/Light Box. Easily collapses for storage. F3d file included for alterations

Ocena
5 / 5
Polubienia
111
Pobrania
362
Wydruki
1
Wyświetlenia
3107
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

These corners fit 5mm foam board. I've included the .f3d file for alterations if your board is larger or smaller. 

If your boards are rectangles and you dont want to cut the excess off for the front tabs you can sink them on the build plate until the face is open. I included a .3mf file showing open face brackets for the front corners.

I printed these with a .6mm nozzle, 5% infill, 3 top/bottom layers, and I used PETG but you could use PLA and be fine.

Tagi