Kitchen part (Küchenteil) for Märklin 4024 (Speisewagen)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,07 € – 0,08 € netto (bez VAT)
Dla pliku: Tableclothes_single_0.25n_0.07mm_PLA_MK3.9.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,07 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 4,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Küchenteil für Märklin 4024
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 1020
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Die Einrichtung für den "4068" passt auch in den 4024 Speisewagen. Nur ein Teil der Küche aus "Interior for the Märklin 4068 SBB- Restaurant car" von ccs66 habe ich remixed. Dazu habe ich von "4068-2-1" aus dem Original ein Stück an "4068-2-2" gesetzt.
Der Teil mit Ausschnitt ist dafür gedacht, wenn sich auf dieser Seite der Stromanschluss befindet.
Außerdem braucht man noch die Teile "4068-1" und und "4068-2-3" aus dem Original.
Hinzugefügt im Mai 2024: Tischdecken
The equipment for the "4068" also fits into the 4024 dining car. I only remixed part of the kitchen from "Interior for the Märklin 4068 SBB- Restaurant car" by ccs66. To do this, I added a bit of "4068-2-1" from the original to "4068-2-2".
The part with the cutout is intended for when the power connection is on this side.
You also need the parts "4068-1" and "4068-2-3" from the original.
Added (may 2024): Table clothes
Post-Printing =============
Wenn man die Sitzreihen längs in zwei Teile bricht (das geht bei PLA ganz gut), lassen sie sich leichter einsetzen.
If you break the rows of seats lengthways into two parts (that works quite well with PLA), they can be inserted more easily.
Category: Vehicles