Blank Keycap for Razer Ornata V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blank for making your own custom key caps on the Razer Ornata V2
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 431
- Wydruki
- 0
- Wyświetlenia
- 1314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried very much to model this as close to the original as possible. The fitting part clips into the switch with a very slight amount similar to how the original fits and key presses seem to have a similar feel. While there exists a few different models of this key already, I found none of them were very accurate or true to the actual keycap's fitting so I made my own version.
In my case, I printed this using an Anycubic Photon Mono X 6K. I have not tested it with an FDM printer but I am sure as long as you keep the line widths and heights reasonable, it should work without issue. If you do try this I would love feedback on the quality of the model.