Fiero Door Skin Washer and Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Washer and Cap for use with metric cap screws instead of the factory molded screw.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Tired of fighting with the Fiero Door Skin bolts that are buried in plastic that strip out when you try to remove them? I know I am after messing a few of them up trying to remove them. This washer is designed to be used with a metric cap screw, M6 x 1.0 IIRC, so that you can easily unscrew them using a hex key tool such as an Allen wrench. The cap slides onto the screw to protect it from damage. PLEASE DOUBLE CHECK THE SCREW THREAD SIZE! I made these years ago and my memory may be faulty. The good news is that most big-box hardware stores sell the metric cap screws so you can take one of the original fasteners with you to make sure you get the right size and length.
I would print this with PETG and 100% infill. The parts work great and simplify removing the door panels greatly!