Fiero Interior Light Lens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lens for the four lights in the overhead console.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement lens for the four overhead lights. This part needs to be printed using PETG or similar CLEAR plastic to avoid heat problems. It is recommended to replace the bulbs with LEDs as well to reduce any risk of damage, however unlikely.
I included the reflective elements to match the original parts.
Print this part using 100% infill and a SLOW process so that the part is as clear as possible; research printing clear parts on Forums for help if you need it because printing crystal-clear parts can be daunting! If you don't care that it has a “frosted” appearance, then print it however you like, even using colored plastic for an interesting glow effect should work; tinted clear colors, like red or orange or purple should work great for this!
The clips are thin, just like the original parts, and can be fragile so take care installing and removing them. I haven't broken one yet be aware of it and make spares if you want.