1 / 3
Lithium Ion 18650 holder for 1950s Delta "PowerLite" LED flashlight mod! — zdjęcie 1
1 / 3

Lithium Ion 18650 holder for 1950s Delta "PowerLite" LED flashlight mod!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tray I made years ago for my Delta Powerlite flashlight mod. It'll need modifying to best fit your flashlight.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
216
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

A 3D printed 18650 case I made for my Delta Powerlite flashlight. I had to cut a lot away to make it fit, but there are so many different versions of the Delta Powerlite that I kinda feel you couldn't make one that fits them all anyway. Might be best to print and carve with a knife to make fit!

Intended to hold all the 18650s in parallel, using a usb lithium charger circuit to charge, then a boost converter to step it up to the 12v for the 12W red LED and 25v for the 100w LED. I ran the 100w LED at more like 15W so it didn't need cooling. Quite efficient.

Tagi