Pokemon TCG Flipcoin Card-Sized Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Both plastic-only and thin versions if you want to glue a special - but not *too* special - card onto it for display.
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 467
- Wydruki
- 4
- Wyświetlenia
- 1785
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you have a pile of shiny Pokemon TCG coins that are sitting in a tin somewhere? Print these card-sized holders and put those coins into a card binder that you will never open instead!
I also included a slightly thinner version (carded) that you can glue other cards onto (see the energy card photos? Those are normal cards glued onto the thinner 3D prints then cut with an x-acto knife) I had some success using 3M Super 77 spray glue; the kind that looks like a can of spray paint. Just be careful with the overspray cause that stuff will hold onto your coins FOREVER.