Lego Technic Special Part - Slit Gear 4T for slider and rotate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this Lego Special part. Gear Slit 4T for helicopter design. Very tight fit on the axle slot. As I would…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 1231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed this Lego Special part. Gear Slit 4T for helicopter design.
Very tight fit on the axle slot. As I would like to rotate the meshing gear while able to push up and down the adjacent gears.
The conventional Screw Lego is not able to di that without causing rotation translation that will mess up the propeller blade pitch.
Print at 100% infill, at 0.12mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
38
Filament: Brambo PLA+ SilverGray Post-Printing =============
Category: 3D Printing