Facemask Holder with wall plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this face mask holder as to organize it well from clutter and for hygiene purpose. The extended hook is about…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Designed this face mask holder as to organize it well from clutter and for hygiene purpose.
The extended hook is about 12cm in length with ribs and a J hook. Allows multiple mask holder and reused face mask.
The wall plat slot is a tight fit with a notch that allows very tight assembly for the extended hook. Print separately. You can embossed it with your initial as to make it your own personal mask holder. Recommended to use it individually to cover your different family members.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
40
Filament: PLA PLA Light Blue
Notes:
This is a tight fit assembly. The slot and the extender hook has being reduce tolerance to about 0.5mm to allow direct slot without any trimming or sanding. A small notch is added to allow good tight fit. Print it separately as it is faster. Will use about 4.5meter of filament and about 2hrs of printing time.
Print accurately on PLA since this require tight fit for the extender hook and wall slot.
Use very minimal support. Print lying down for faster printing.
Category: 3D Printing