Z Axis Knob for 8mm Screw Lead Ender 3V2 - Updated with Bigger Screw Thread
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick Fusion360 designed for a Knob for Z-axis screw lead M8 2mm pitch. The screw hole has 2 degree, loose…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 567
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a quick Fusion360 designed for a Knob for Z-axis screw lead M8 2mm pitch.
The screw hole has 2 degree, loose and tight. May need some filling if your printer is similar to mine. A quick filling will help to tightened the knob to the screw lead.
If you have a M8 thread, use the Z-Axis Knob II v7.stl - with deeper hole thread and chamfer entry.
Older File removed. - If you have a M6 thread, use the Z-Axis Knob v6.stl
Either way, depends on your 3D printer printing tolerances, you can use both.
Just need to hack a bit on the screw lead entre.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50
Filament: Any PLA Brand PLA White
Notes:
Require 1.5-2meter of filament 1.75mm.

Category: 3D Printing