Night desk lamp Peace&Relax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After refurbishing our bed room , my wife was asking to create/desing a lamp which fits to the new interior.
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 210
- Wydruki
- 2
- Wyświetlenia
- 1780
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
After refurbishing our bed room , my wife was asking to create/desing a lamp which fits to the new interior.
This is the final one ! : )
If you like it print it & enjoy !
Print instructions
In the basic design was considered not to use any support. The lampshade inner & upper part is printed w.o. support out of PLA.
Inner part as thin layer with 0.6 mm nozzle, 0.4 mm thickness , the upper part also with 0.6 mm nozzle, in-fill 99%
The shade carrier part are printed out of PETG with 0.2 mm nozzle, 0.15 mm layer thickness
The Lamp body and bottom are out of PLA with in-fill 65%, printed with 0.6 mm nozzle , 0.4 mm thickness.
It is more economic to print the body part upside down, here you might need a little bit of support.