1 / 1
Prusa mk3s LGX gears mod works with mmu2s — zdjęcie 1

Prusa mk3s LGX gears mod works with mmu2s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

attempt to change original gears to Bondtech LGX Large Gears. Have used this now for a year.

Ocena
0 / 5
Polubienia
7
Pobrania
66
Wydruki
0
Wyświetlenia
604
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Don't attempt unless you are very comfortable with modding your printer and good at  troubleshooting. Printer needs to be recalibrated etc. I have used this setup now for a year and i am happy with it. PLA, PETG filaments print faster and soft filaments print without any issues of getting jammed etc.  Carbon fiber filaments and other difficult stuff  prints appsolutely without any issues, unless MMU decides to strike or smth ..  

parts used :

m3 x 5mm  insert

2x https://www.bondtech.se/product/lgx-secondary-gear/ LGX Secondary Gear

2x https://www.bondtech.se/product/lgx-secondary-gear/ LGX Hardened Steel Drive Wheel

Tagi