RV Refrigerator Door Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RV Fridge door holders are used to keep the freezer and fridge doors open when the fridge is turned off for RV storage.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 239
- Wydruki
- 0
- Wyświetlenia
- 1403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Hold Your RV Fridge Door Open
These door holders can be used to prevent your RV refrigerator from getting moldy when your motor home is not in use. Simply turn off your refrigerator as you normally would and insert these door stops between the upper freezer door and lower fridge doors. Put one on the left door set and on on the right door set to hold all four doors open to allow air flow. Doing this prevents moisture from remaining in your refrigerator when storing your RV. Simply remove them when ready to use your motor home again.
I printed these in Yellow PLA but any bright color filament you have on hand would work. I chose a bright color to easily see when these were installed when closing up our motor home after use.
I used the following settings:
- .4mm Nozzle
- .2mm layer height
- 3 layer top and bottom
- 4 perimeters
- 60% infill