1 / 2
Z50 and Z60 cogwheel for fischertechnik
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z50 and Z60 cogwheel for fischertechnik
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Two types of Z50 and Z60 cogwheels for use with fischertechnik. The cogs will mount with the regular nr 31014 or 31015 hubs to a 4mm axle.
To make it easier to print without support, I also added the models with one flat, non-faceted side. Two faceted edges are only necessary when using fischertechnik chains anyway and it can be easily made by hand afterwards with a sandpaper (along the rotating gear) if necessary.