1 / 2
Hardspace: Shipbreaker Lynx Corporation single nozzle multicolor — zdjęcie 1
1 / 2

Hardspace: Shipbreaker Lynx Corporation single nozzle multicolor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of frycharante Lynx logo from the game Hardspace: Shipbreaker using the multicolor technique with Lift Z

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The multicolor technique with Lift Z can be accomplished using Lift Z under Printer Settings Extruder.  For the included gcode I only used Lift Z on the yellow since it will have to jump over the black. you need to ensure you have it lifting over the 2 layers you have set down. so for my .4 layer height i made it lift to .9mm to clear both layers.

  1. Print black, and leave on the build plate
    1. clean away purge line and skit if you enabled it.
  2. Swap to yellow and print using gcode with lift z enabled to jump over the layers you have from the black.