Amateur Radio Morse Code Paddle / CW Key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly modified version of Adam Kimmerly's already great design.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 3712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Great design for a 3D paddle with just a few modifications including:
- Added side walls to the base to prevent accidental keying
- Rounded the base bottom for a better feel
- Added screw holes to bottom to facilitate additional stuff
- Created a add-on piece to facilitate a Velcro strap on the bottom. Can be used to strap on a leg, wrist or even finger.
I have included Adam's original files. My modifications are just to the base piece and the addition of a strap piece. I also included a handy wrench tool to help put on the 3.5mm plug nut and a set of tweezers to help hold the 3.5mm jack when inserting it into the paddles.
I do all my design work in OpenSCAD (which is free to download). The source file is included.
I run a non-standard 0.6mm nozzle on my PRUSA so I am not including the sliced files. You can generate them for your printer from the STL files.
Here is the Amazon links to the additional hardware I added:
2.2x10mm Self Tapping Screws Phillips Pan Head Screw:
https://www.amazon.com/gp/product/B07NTJ95W1
ONE-WRAP TAPE 1/2" X 25 YARD ROLL:
https://www.amazon.com/gp/product/B071Y3TVNT