1 / 8
Purge Volume Calibration Tool - MMU2S 5 Filament Color Change
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save material. Calibrate 5 colors in one print (20 changes total), all color changes are automatic.
- Ocena
- 4,714 / 5
- Polubienia
- 96
- Pobrania
- 614
- Wydruki
- 7
- Wyświetlenia
- 2727
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 7) (Komentarze: 13)Remiksy (1)Kolekcje (161)Powiązane
Print this calibration tool and create little swatches you can go back to and read off the volume (in mm cubed) of material needed to purge a given color change.
All 5 colors swap with all 4 of the other colors in each direction. That's 20 color changes total. To reduce the number of color changes (eg to calibrate for 3 filaments only) you can go into the 3mf file and delete the color changes that are not needed.