Lego Speed Champions Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lego Speed Champions car stand compatible with the pre-2020 cars that are 6 studs wide.
- Ocena
- 4,786 / 5
- Polubienia
- 233
- Pobrania
- 1575
- Wydruki
- 15
- Wyświetlenia
- 8816
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I re-mixed the Lego Speed Champions Car Lift model to better accommodate the pre-2020 cars that are 6 studs wide (the newer cars are 8 studs wide and will not work unless you scale up the model.) I also redesigned the floor to reduce filament use. I incorporated the pegs into the floor and designed brand logo signs. We chose to group the cars by manufacturer, but you can keep expanding horizontally and vertically as much as you'd like. I hope you like the end result as much as my son did. I'm curious to see your makes.
PrusaSlicer recommended print settings for the stand parts:
- Layer height = 0.30
- Infill = 15% (Grid)
- Top Layers = 0
- Bottom Layers = 0
- Supports = None
PrusaSlicer recommended print settings for the signs:
- Layer height = 0.30
- Infill = 0%
- Supports = None
- You will be prompted for a filament change at layer 3.
