Wyrmwood MGT Coffee Cup Holder with Upgraded magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An MGT/Prophecy(?) compatible coffee cup holder using screwed in cylinder magnets
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 948
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Modified the original model to use countersunk screw-in magnets of the same sort that is used in the official accessories and change the profile slightly to incorporate a curve at the back. Reducing the surface area that actually makes contact with the magnetic rail means you don't have to worry about any grit or minor irregularities on the rail becoming a fulcrum and stopping the magnets from making contact, so overall you should have a stronger & more reliable attachment. It might also make it more compatible with the Prophecy table - but since I don't have one to test with someone else will need to see if I'm right.
You'll need two magnets & some #6 wood screws to assemble it. I'd also suggest a cork lining to add some extra style and help insulate the plastic from any hot beverages you may be drinking. A 4" cork circle fits just about perfectly.
As far as printing goes, getting good adhesion in the back corners where the magnets go in is absolutely essential. The magnets really need to fit tight for maximum strength, so any warping back there can ruin the whole print. Brims or rafts are highly recommended.
