BN-180 GPS & XT60 Holder for Cloud-149HD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As named, haha
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a weird one, was originally supposed to be a GPS holder then I got carried away and stuck a gap for an XT60 into it. Even weirder is the method of printing, which is by standing it up on its end, which causes a little drooping on bridges areas, which lends to extra tightness when fitting in the GPS and XT60, effectively holding each more securely.
The space for the GPS is a stretch and press fit, loose enough to get the GPS in with some massaging of the TPU. Afterwards the GPS is plugged in, then the XT60 is pushed through.
It's not ideal, but it worked for me.
Notes:
As stated, no supports are required if you use your slicer to orient the part to stand on its end. The gentle curve creates an overhang, but if adhesion is good (and with TPU it usually is) it will quite happily print this way.